Scunthorpe Speedway | Speedway & Stockcars | Eddie Wright Raceway
Engine Restrictions
Vauxhall Corsa C
The maximum engine size permitted is 1200cc. Engines with a 1400cc capacity are not permitted.
Prohibited Models
The following models are not permitted in Micro Banger events:
Nissan Micra K12
Vauxhall Corsa D
Other Vehicle Models
For all other permitted car models, the maximum engine size is 1300cc.
Engine Swaps
Engine swaps are strictly prohibited.
Throttle Adjustments
Fly-by-wire throttle systems may be replaced with earlier cable-operated throttles, provided they are from the same make and model.
Larger throttle bodies are not permitted under any circumstances.
Engine Mounts
Strengthening
Original engine mounts may be strengthened but must remain in their original position.
Fabricated Mounts
Fabricated mounts may replace the original mounts, subject to the following conditions:
They must be bolted to the chassis using a maximum of 3 bolts.
The maximum size of the mount on the chassis is 8½ inches.
The mount must not extend more than 50mm past the engine face for a bolt.
Original bolt holes may be used, but drilling new holes is permitted.
Additional Guards
Engine mounts may include guards to protect the following specific components:
A sump guard for exposed sumps.
An oil filter guard for forward-facing oil filters.
A knock sensor guard for forward-facing knock sensors.
These guards must:
Be bolted only to the front of the engine or the engine mount.
Not be attached under the engine or to any gearbox fixings.
Have a maximum thickness of 6mm.
Be used solely to protect the engine and keep it operational.
Astra/Corsa Models
Engines cannot be attached to the subframes on Astra or Corsa vehicles.
Gearbox Mounts
Gearbox mounts may either be strengthened or replaced with fabricated mounts, subject to the following conditions:
The maximum size of the mount on the chassis is 6 inches.
The mount must not extend past the engine face (the point where the manifold bolts to the engine).
Ford Fiesta/KA Exception
For Ford Fiesta and Ford KA models:
The gearbox mounting must not exceed the main chassis leg.
It may only be bolted to the lower bolts in the chassis for the gearbox mount.
No part of the mount may protrude more than 10mm forward of the gearbox.
Chassis Restrictions
No additional metal is permitted on the chassis for mounting the engine.
Engine mounts must not be designed to protect other components, such as water outlets or distributors.
Approved Vehicles
Only cars included on the approved vehicle list are permitted.
For cars not included on the list, drivers must contact the promoter to obtain approval if they believe the vehicle meets the necessary specifications.
List of Eligible Cars for National Micro Bangers
Effective from 1 January 2023
Austin
A30
A35
A40 – Farina only (not Somerset or Cambridge)
Metro 1000
Metro 1300
Allegro 1000
Allegro 1100
Allegro 1300
Chevrolet
Matiz
Spark Mk2
Spark Mk3
Citroën
2CV
Dyane
AX
Saxo
Visa
C1
C2 – 1.1 only
Daewoo
Matiz
Daihatsu
Charade Mk1
Charade Mk2
Charade Mk3
Datsun
100A (Cherry)
Lada
Samara
Lancia
Fulvia
Mazda
121
Mini
Classic Mini only
Mitsubishi
Colt Mk1
Colt Mk2
Colt Mk3
Morris
1100
1300
Minor
Nissan
Micra K10
Micra K11
Pixo
Peugeot
104
106
107
108
205
206 Mk1 – hatchback only
Proton
Satria
Compact
Renault
4
5
6
10
Clio Mk1
Clio Mk2
Modus Mk1
Riley
Elf
Rover
Metro (also known as Rover 100)